“Raspberry Pi 4 Model-B with 4 GB RAM” has been added to your cart. View cart
This product is available on backorder. Lead time will be 50 days.
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- Voltage Range: 100-120 V
This product is available on backorder. Lead time will be 50 days.
- 3-in-1: 3D printing, 10W laser, pen drawing
- Multi-material: Flexible, rigid, exotic filaments
- Precise laser: 0.3mm alignment, cuts up to 5mm
- Fast printing: Up to 600mm/s, 350°C hotend
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
This product is available on backorder. Lead time will be 50 days.
- Multi-material printing – Flexible, rigid, and exotic filaments.
- High-speed – Up to 600 mm/s with 350°C hotend.
- Large build volume – Max 350 × 320 × 325 mm³.
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
7Semi Mini ATmega328P Board – 5V
In Stock
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
In Stock
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
In Stock
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
In Stock
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
In Stock
- Operating Voltage: 5V
- MCU: ATMEGA 328P
- Input Voltage (recommended): 7-12V.
- Input Voltage (limit): 6-20V.
- Digital I/O Pins: 14
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
In Stock
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino UNO R3 CH340G ATMega328P compatible with arduino + Cable
In Stock
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.