“Arduino MEGA R3 ATmega2560-16AU Development Compatible Board” has been added to your cart. View cart
STC-3028 Digital Temperature Humidity Controller 110-220V
In Stock
- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators
110V~ 220V AC All-Purpose Temperature Control Controller with Sensor 2 Relay Output Thermostat Stc-1000
In Stock
- Mini Temperature Controller is an excellent and convenient multifunction device for controlling the temperature in Aquariums.
- The stability of aquarium temperature is one of the crucial factors that contribute to the health and safety of your fish.
- By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish.
- This advanced temperature controller can measure and control temperature from -50 to 90 °C.
- This device is also suitable for Laboratories use and other temperature-controlled systems.
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
In Stock
- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
Official Arduino Uno R3 SMD Microcontroller Board – A000073
In Stock
- Microcontroller board featuring an ATmega328P in an SMD package
- Provides 14 digital input/output pins, with 6 capable of PWM output
- Includes 6 analog input pins for reading sensor data
- Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
- Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
- Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
- The SMD Arduino Uno version of the popular Arduino Uno board
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
In Stock
- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
Noel 25W 230V Sodering Iron Model-GOLD
In Stock
- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
7Semi Mini ATmega328P Board – 5V
In Stock
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
In Stock
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
In Stock
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
In Stock
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
In Stock
- Operating Voltage: 5V
- MCU: ATMEGA 328P
- Input Voltage (recommended): 7-12V.
- Input Voltage (limit): 6-20V.
- Digital I/O Pins: 14
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
In Stock
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.