0
0 items
₹0.00
No products in the cart.
8 Road/Channel Relay Module (with light coupling) 24V
In Stock
SKU:008668- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
5V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
In Stock
SKU:008658- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
4 Channel Relay Module 5V High and Low Level Trigger Relay Module
In Stock
SKU:008655- Work Voltage: 5VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
In Stock
SKU:008650- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
In Stock
SKU:008644- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
5V 1 Channel Without Light Coupling Relay
In Stock
SKU:008570- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Timing Delay Switch Circuit with Double MOSFET Control
In Stock
SKU:008565- Wide voltage power supply (6~30V)
- supports micro USB 5.0V power supply
- The interface is clear and simple, powerful, easy to understand
- All set parameters automatically save power.
2.8 inch SPI Touch Screen Module TFT Interface 240*320
In Stock
SKU:007249- Touch: Resistive
- Display Size: 2.8″
- Size: 8.5 x 4.8cm
- Input Voltage (V): 3.3 to 5
- Driver IC: ILI9341
- Color Depth: 262K/65K
- Resolution (dots): 240 x 320
PS2 Joystick Module Breakout Sensor
In Stock
SKU:006768- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter
In Stock
SKU:006699- Working voltage: DC 9V–36V
- Output voltage: 5.2V/5A/25W
- 9~24V input: Output 5.2V/6A/30W
- 24~32V input: output 5.2V/5A/25W
- 32~36V input: output 5.2V/3.5A/18W
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU:006689 SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
12V 4CH Relay Board
In Stock
SKU:006651- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
2 CH 12V Relay Board
In Stock
SKU:006646- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
PAM 8403 Amplifier Module with Knob
In Stock
SKU:006489- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
SKU:006487- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
SKU:006476- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















