0
0 items
₹0.00
No products in the cart.
5V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
In Stock
SKU:008658- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
4 Channel Relay Module 5V High and Low Level Trigger Relay Module
In Stock
SKU:008655- Work Voltage: 5VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
In Stock
SKU:008650- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
In Stock
SKU:008644- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
Out of stock
SKU:008642- Part Number: H3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50@2A
- Isolation: Phototriac
ESP8266 10A DC 7-30V Network Relay WIFI Module
Out of stock
SKU:008637- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module
Out of stock
SKU:008630- Operating voltage: 12vDC
- Output Voltage: 12 V
- Output type: Double output
- Detection range: adjustable 10-80 MM
- Max Power Load: 36 W
YX850 Power Failure, Automatic Switching, Standby Battery Lithium, Battery Module 5V-48V
Out of stock
SKU:008625- Product Name: Power failure automatic switching module
- Product model: YX850
- Scope of application: DC5V-48V
- Product load: 10A
- Product size: 61mm*29mm
5V 4 Channel SSR Solid State Relay Module 240V 2A Output with Resistive Fuse
Out of stock
SKU:008619- Has been assembled, and electrical test passed.
- Led indicator for each relay.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger
Out of stock
SKU:008615- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
Out of stock
SKU:008605- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
12V 16 Channel Relay Module with Light Coupling LM2596 Power Supply
Out of stock
SKU:008594- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
24V Dual Channel Relay Module (with Light Coupling)
Out of stock
SKU:008583- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module
Out of stock
SKU:008573- Material – Steel, Plastic, PVC
- Power Supply – DC 12V
- Operating Current – Before the relay actuation: less than 5mA Relay after pull-in: 5V module is less than 50mA
- Switching Voltage: 250VAC@10A; 30VDC@10A
5V 1 Channel Without Light Coupling Relay
In Stock
SKU:008570- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Timing Delay Switch Circuit with Double MOSFET Control
In Stock
SKU:008565- Wide voltage power supply (6~30V)
- supports micro USB 5.0V power supply
- The interface is clear and simple, powerful, easy to understand
- All set parameters automatically save power.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















