0
0 items
₹0.00
No products in the cart.
10A Intelligent LCD Solar Controller
Out of stock
SKU:008885- Built-in Industrial Micro-Controller
- Big LCD Display
- All Adjustable Parameters
- Full 4 Stage PWM Charge Management
RS232 to TTL SP3232 UART Transceiver Communication Serial Module
Out of stock
SKU:008873- IC Chip: SP3232E
- Operating Voltage: 3.0V – 5.5V
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- ESD enhanced
- Hardware flow control supported
Arduino PCF8574T I2C 8 Bit IO GPIO expander module
Out of stock
SKU:008868RS485 to TTL Serial Port Converter Adapter Communication Module
Out of stock
SKU:008862- Model Number: RS485 CAN
- Supply Voltage: 3.3-5v
- Operating Temperature: 40°-85°
- Type: Communication module
RS422 to TTL Power Supply Converter Board
Out of stock
SKU:008856- RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters
- The module has ESD 15KV protection.
- Onboard to increase the limit of 10 ohms current limiting current protection.
- Module with TVS diode. Anti lightning, peak voltage.
- The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
Out of stock
SKU:008851- USB Connector type: USB-Mini
- Chip Used: FT232RL
- Output Voltage 5v and 3.3v Indicator LEDs USB Connector
- Automatic detection of data transfer speeds up to 1Mbps
- Data exchange capability with an external interface with UART protocol
- Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
Out of stock
SKU:008846- Chipset: CP2102
- Power: USB, 3.3V (<40mA), 5V, GND, TX, RX
- Baud Rate: 300bps to 1Mbps.
- Signal Levels: 3.3V, positive logic.
- OS Support: Windows, Mac OS, Linux.
- Format Support: 5-8 data bits, 1/2 stop bits
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
In Stock
SKU:008720- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 12V relay ON; 0-2.5V relay OFF
24V 1 Channel Relay Module
In Stock
SKU:008711- Output SPDT Relay.
- Header connector for connecting power and trigger voltage.
- LED indicates relay status.
- Screw terminal connector for easy relay output connection.
Humidity Sensitive Switch Relay Module
In Stock
SKU:008700- Maximum Voltage(V):250V AC
- Supply Current (A):150mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Opt. Relative Humidity(RH):20% ~ 85%
ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
In Stock
SKU:008691- Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
- Working Voltage: DC 5V
- Load Voltage: DC 30V 10A /AC 250V 10A
- Work Temperature: -40℃~85℃
- Work Humidity: 0%~95%RH
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
In Stock
SKU:008681- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
4 Channel Relay Module 24V High and Low Level Trigger Relay Module
In Stock
SKU:008676- Work Voltage: 24VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
In Stock
SKU:008672- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
8 Road/Channel Relay Module (with light coupling) 24V
In Stock
SKU:008668- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
2 Channel 12V High and Low Level Trigger Relay Module
In Stock
SKU:008663- Default Relay trigger Setting : Low-Level
- Logic Input (V) : 3.3 ~ 5
- Trigger Voltage (VDC) : 12
- Switching Voltage (VAC) : 250@10A
- Switching Voltage (VDC) : 30@10A

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















